rmutyala
07-14 07:39 PM
Houston
wallpaper chris andersen tattoos. Chris Andersen Tattoos. Tattoo, chris andersen or;
funny
09-16 02:27 PM
Don't forget to CALL guys..
ns33
03-18 04:22 PM
Answers below:
1. Technically there is no Salary restriction. As stated above it is a grey area. But, if the job duties are the same and the salary difference is too big (no one knows how much is acceptable without raising questions), then it brings into question if you are still performing the same duties. But basically, you have to make equal to or more than the LC.
2. I have used AC21 before. Have not done EAD renewal yet.
Have a question about point1. Most of larger corp employees who have been in the wait cycle 6-8 years, entered in this coprs at rather lower salaries compared to current day standards. Once inside, pending GC process, you do not get too much of raise or adjustments (2-5% - more of inflation adjustments every 1.5-2 years or so).
Going out of these positions, within similar technical positions, even at lower - rather conservative end of the current pay scale (on AC21-EAD) it is very easy to reach bracket closer to 40-50% higher. Converting to full time consultants, even in tighter market due to current economy; would actually mean closer to 60-70% difference. How do we handle this? Staying within large corp on FT basis does not make sense financially after all these years. Espcially when EB3 category PD doesn't show any sign of life.
If you have a good suggestion/solution please PM me.
Thanks
NS
PS. this entire rant is about people who have been in the same FT position without promotions and very minimal pay adjustments in large corporations - probably outside west cost. So please keep any and all flaming at my post in the context.
1. Technically there is no Salary restriction. As stated above it is a grey area. But, if the job duties are the same and the salary difference is too big (no one knows how much is acceptable without raising questions), then it brings into question if you are still performing the same duties. But basically, you have to make equal to or more than the LC.
2. I have used AC21 before. Have not done EAD renewal yet.
Have a question about point1. Most of larger corp employees who have been in the wait cycle 6-8 years, entered in this coprs at rather lower salaries compared to current day standards. Once inside, pending GC process, you do not get too much of raise or adjustments (2-5% - more of inflation adjustments every 1.5-2 years or so).
Going out of these positions, within similar technical positions, even at lower - rather conservative end of the current pay scale (on AC21-EAD) it is very easy to reach bracket closer to 40-50% higher. Converting to full time consultants, even in tighter market due to current economy; would actually mean closer to 60-70% difference. How do we handle this? Staying within large corp on FT basis does not make sense financially after all these years. Espcially when EB3 category PD doesn't show any sign of life.
If you have a good suggestion/solution please PM me.
Thanks
NS
PS. this entire rant is about people who have been in the same FT position without promotions and very minimal pay adjustments in large corporations - probably outside west cost. So please keep any and all flaming at my post in the context.
2011 Wings - Chris Andersen.
posmd
06-08 07:45 PM
Guys,
I have approved EB3 LC and approved I 140 with PD JAN 2002. My wife has approved EB2 LC (Perm) and Approved I 140 with PD JAN 2006
As we represent one family can't my wife use my PD and apply I 485 under EB2.
for example If husband is born in a retrogressed country and wife in a non retrogressed country in that case, husband gets a free ride !
Why not in this case ? Just curious !
Faced with this same predicament. The truth is the US immigration rules were not made to cater for this era of fast paced change and lifestyles.
When the current EB rules were fashioned, mostly in the early 1960s most families had one working household and were generally migrating in the very highest skills level. Opportunities in the high skilled fields were also not as prevalent as they are today. US was not the knowledge economy it is today.
In the same sense people if they would migrate did so just once in their lifetime, nowadays people often shift 3 places sometimes even more. Hence your citizenship does not count, only your birth place. Imagine the insanity in a scenario that you are from antigua and you are born in India while your father was serving as the consul general there. If fate and destiny have you wishing to immigrate to the US now in the EB2 category then you would have to have a PD of Jan 2003 as opposed to current.
Many such combinations are possible, but in my humble view all this country quota stuff for EB based immigration is ridiculous and worse yet when it takes no acccount of population size. Clearly they ought to be more discerning in who they allow in via EB immigration by tightening the regulations as they stand currently, but this insane quota is off base in todays world.
A quota system for family or any other type of immigration is more reasonable, but once it is deemed you are immigrating based on your skills why should something else matter in this land of opportunity where every man is considered equal and is said to rise or fall on his ability and nothing else. Perhaps others know the answer to this but it befuddles me and makes me realise how antequated the rules really are.
I have approved EB3 LC and approved I 140 with PD JAN 2002. My wife has approved EB2 LC (Perm) and Approved I 140 with PD JAN 2006
As we represent one family can't my wife use my PD and apply I 485 under EB2.
for example If husband is born in a retrogressed country and wife in a non retrogressed country in that case, husband gets a free ride !
Why not in this case ? Just curious !
Faced with this same predicament. The truth is the US immigration rules were not made to cater for this era of fast paced change and lifestyles.
When the current EB rules were fashioned, mostly in the early 1960s most families had one working household and were generally migrating in the very highest skills level. Opportunities in the high skilled fields were also not as prevalent as they are today. US was not the knowledge economy it is today.
In the same sense people if they would migrate did so just once in their lifetime, nowadays people often shift 3 places sometimes even more. Hence your citizenship does not count, only your birth place. Imagine the insanity in a scenario that you are from antigua and you are born in India while your father was serving as the consul general there. If fate and destiny have you wishing to immigrate to the US now in the EB2 category then you would have to have a PD of Jan 2003 as opposed to current.
Many such combinations are possible, but in my humble view all this country quota stuff for EB based immigration is ridiculous and worse yet when it takes no acccount of population size. Clearly they ought to be more discerning in who they allow in via EB immigration by tightening the regulations as they stand currently, but this insane quota is off base in todays world.
A quota system for family or any other type of immigration is more reasonable, but once it is deemed you are immigrating based on your skills why should something else matter in this land of opportunity where every man is considered equal and is said to rise or fall on his ability and nothing else. Perhaps others know the answer to this but it befuddles me and makes me realise how antequated the rules really are.
more...
dbevis
December 5th, 2003, 11:13 PM
Could you put a link up to that plug in? I really like that.
I was playing around with it again tonight - I posted a couple more examples in the gallery area, under "landscapes".
This is not a plugin, persay. It's a PaintShop Pro script - not PhotoShop. Here's what the script does:
Split to RGB, discard G & B
"Clarify" (twice) at a high value to deepen the contrast range.
Adjusts the luminance channel to further enhance contrast.
Colorizes the image with a hue value of 160 and saturation a low setting of 20 to slightly shift grays towards blues.
I then added the original full-color image in as a layer and merged the two with partial opacity in (I think) "hue" mode.
The Clarify operation gives it an "old" look by accentuating and muddling the contrast. The lumininance adjustment makes the overall appearance more 'harsh'. The shift towards blue tends to simulate a bit of fading (like an old snaphot, I guess).
The painting-like effect comes from merging in the colors from the original.
Here's the actual script file (it's in the "Python" programming language):
--------------------------------------
from JascApp import *
def ScriptProperties():
return {
'Author': '',
'Copyright': '',
'Description': '',
'Host': 'Paint Shop Pro',
'Host Version': '8.00'
}
def Do(Environment):
App.Do( Environment, 'SplitToRGB', {
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'SelectDocument', {
'SelectedImage': 0,
'Strict': App.Constants.Boolean.false,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'FileClose', {
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Silent,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'SelectDocument', {
'SelectedImage': 0,
'Strict': App.Constants.Boolean.false,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'FileClose', {
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Silent,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'SelectDocument', {
'SelectedImage': 0,
'Strict': App.Constants.Boolean.false,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'Clarify', {
'Strength': 4,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'Clarify', {
'Strength': 4,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'HistogramAdjustment', {
'LuminanceChannel': {
'Appearance': 0,
'Gamma': 1,
'HighClipLimit': 245,
'HighClipLimitPercentage': 0.01,
'LowClipLimit': 2,
'LowClipLimitPercentage': 0.01,
'MaxOutput': 255,
'MinOutput': 0
},
'RedChannel': {
'Appearance': 0,
'Gamma': 1,
'HighClipLimit': 255,
'HighClipLimitPercentage': None,
'LowClipLimit': 0,
'LowClipLimitPercentage': None,
'MaxOutput': 255,
'MinOutput': 0
},
'GreenChannel': {
'Appearance': 0,
'Gamma': 1,
'HighClipLimit': 255,
'HighClipLimitPercentage': None,
'LowClipLimit': 0,
'LowClipLimitPercentage': None,
'MaxOutput': 255,
'MinOutput': 0
},
'BlueChannel': {
'Appearance': 0,
'Gamma': 1,
'HighClipLimit': 255,
'HighClipLimitPercentage': None,
'LowClipLimit': 0,
'LowClipLimitPercentage': None,
'MaxOutput': 255,
'MinOutput': 0
},
'TargetChannel': 0,
'OverlayResultHistogram': App.Constants.Boolean.true,
'HistogramEditMode': App.Constants.HistogramEditMode.Luminance,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'IncreaseColorsTo16Million', {
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'Colorize', {
'Hue': 160,
'Saturation': 20,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
I was playing around with it again tonight - I posted a couple more examples in the gallery area, under "landscapes".
This is not a plugin, persay. It's a PaintShop Pro script - not PhotoShop. Here's what the script does:
Split to RGB, discard G & B
"Clarify" (twice) at a high value to deepen the contrast range.
Adjusts the luminance channel to further enhance contrast.
Colorizes the image with a hue value of 160 and saturation a low setting of 20 to slightly shift grays towards blues.
I then added the original full-color image in as a layer and merged the two with partial opacity in (I think) "hue" mode.
The Clarify operation gives it an "old" look by accentuating and muddling the contrast. The lumininance adjustment makes the overall appearance more 'harsh'. The shift towards blue tends to simulate a bit of fading (like an old snaphot, I guess).
The painting-like effect comes from merging in the colors from the original.
Here's the actual script file (it's in the "Python" programming language):
--------------------------------------
from JascApp import *
def ScriptProperties():
return {
'Author': '',
'Copyright': '',
'Description': '',
'Host': 'Paint Shop Pro',
'Host Version': '8.00'
}
def Do(Environment):
App.Do( Environment, 'SplitToRGB', {
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'SelectDocument', {
'SelectedImage': 0,
'Strict': App.Constants.Boolean.false,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'FileClose', {
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Silent,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'SelectDocument', {
'SelectedImage': 0,
'Strict': App.Constants.Boolean.false,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'FileClose', {
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Silent,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'SelectDocument', {
'SelectedImage': 0,
'Strict': App.Constants.Boolean.false,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'Clarify', {
'Strength': 4,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'Clarify', {
'Strength': 4,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'HistogramAdjustment', {
'LuminanceChannel': {
'Appearance': 0,
'Gamma': 1,
'HighClipLimit': 245,
'HighClipLimitPercentage': 0.01,
'LowClipLimit': 2,
'LowClipLimitPercentage': 0.01,
'MaxOutput': 255,
'MinOutput': 0
},
'RedChannel': {
'Appearance': 0,
'Gamma': 1,
'HighClipLimit': 255,
'HighClipLimitPercentage': None,
'LowClipLimit': 0,
'LowClipLimitPercentage': None,
'MaxOutput': 255,
'MinOutput': 0
},
'GreenChannel': {
'Appearance': 0,
'Gamma': 1,
'HighClipLimit': 255,
'HighClipLimitPercentage': None,
'LowClipLimit': 0,
'LowClipLimitPercentage': None,
'MaxOutput': 255,
'MinOutput': 0
},
'BlueChannel': {
'Appearance': 0,
'Gamma': 1,
'HighClipLimit': 255,
'HighClipLimitPercentage': None,
'LowClipLimit': 0,
'LowClipLimitPercentage': None,
'MaxOutput': 255,
'MinOutput': 0
},
'TargetChannel': 0,
'OverlayResultHistogram': App.Constants.Boolean.true,
'HistogramEditMode': App.Constants.HistogramEditMode.Luminance,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'IncreaseColorsTo16Million', {
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
App.Do( Environment, 'Colorize', {
'Hue': 160,
'Saturation': 20,
'GeneralSettings': {
'ExecutionMode': App.Constants.ExecutionMode.Default,
'AutoActionMode': App.Constants.AutoActionMode.Match
}
})
psam
03-09 07:31 PM
Hopefully you get a different officer. In my case they officer stamped I-551 on passport which was valid for six months for travel purpose and 1 year for employment.
Other online links suggest to talk with your congressperson so see if you get lucky.
Green Card Lost in the Mail - What to do When Your Green Card is Lost in the Mail (http://immigration.about.com/od/greencards/a/GreenCard_Lost.htm)
Other online links suggest to talk with your congressperson so see if you get lucky.
Green Card Lost in the Mail - What to do When Your Green Card is Lost in the Mail (http://immigration.about.com/od/greencards/a/GreenCard_Lost.htm)
more...
Dhundhun
09-20 10:33 PM
What is GC?
What is it anyway?
If it is philosophical question, then it is something which takes away couple of years of life of some of those people born in India and China (wait and wait and wait and ...), who want to have it. In return it frees them from bond of slavery.
What is it anyway?
If it is philosophical question, then it is something which takes away couple of years of life of some of those people born in India and China (wait and wait and wait and ...), who want to have it. In return it frees them from bond of slavery.
2010 player chris andersen-has-
bigboy007
04-09 03:07 PM
I think too that you in ok shape , I dont see a reason why ppl are against Labor certs not that i have one its legal at time. as Karthik mentioned good to keep all paychecks.
I think you are in good shape to use AC21. Just make sure that you have the paystubs for the first 180 days after filing the I485 application in your present company if in case you get a RFE. That is one of the easy proof that you worked in company A for 180 days after fileing I-485.
I think you are in good shape to use AC21. Just make sure that you have the paystubs for the first 180 days after filing the I485 application in your present company if in case you get a RFE. That is one of the easy proof that you worked in company A for 180 days after fileing I-485.
more...
rimzhim
06-01 01:38 PM
"Masters and PhDs would be exempt from the cap on H-1Bs and green cards," said Hoffman.
Are you sure of this? I, of course, hope you are right. It would be great!
Are you sure of this? I, of course, hope you are right. It would be great!
hair chris anderson tattoos. his chris andersen Firefox
MahaBharatGC
10-13 01:39 PM
Well you are correct I am trying to draw attention because as a saying "you will only know the pain when you walk the line". My company attorneys delayed the filings. I am not blaming anyone but myself. However, the fact of the matter is to find out a way to address this issue which is going to help everyone else. I do not knonw how long my particular case might take but since I am in the process I understood the issue.
First, when you apply in advance, yeah the possibility of approval before existing application expiration is very high. But you will end up loosing the EAD period from the date of approval to the date of last expiration. This is a loss for us.
Second, a renewal should only take less time as it takes for Drivers license. It is not AP where they have to validate your last entry etc etc.
EAD renewal adjudication should be separate from rest of all application processing and should shrink the timline.
Imagine my case. My wife was searching for jobs since her first EAD and now she got one but lack of EAD is going to cause her to loose it.....
First, when you apply in advance, yeah the possibility of approval before existing application expiration is very high. But you will end up loosing the EAD period from the date of approval to the date of last expiration. This is a loss for us.
Second, a renewal should only take less time as it takes for Drivers license. It is not AP where they have to validate your last entry etc etc.
EAD renewal adjudication should be separate from rest of all application processing and should shrink the timline.
Imagine my case. My wife was searching for jobs since her first EAD and now she got one but lack of EAD is going to cause her to loose it.....
more...
morchu
08-01 12:09 AM
There is nothing complicated here.
Put your wifes status as of the 485 filing date. Means if you are filing in July/August this will be H4.
You can travel in H4. Also no problem in changing status to H1 after october 1st. (She have an H1 approval doesnt mean she is NOW in H1 status. Her change of status is approved from Oct 1st). Please remember that if she doesnt start working in H1 on October 1st, technically, she will Neither be in H1 / H4 status on October 1st. Means she might fall under "adjustee" status.
Assuming that your wife starts in H1 status from Oct 1st, there is no problem in travelling in H1. (she might need to get an H1 visa stamp though).
The other option is she can fall under adjustee status and travel in AP, work in EAD.
Also after 485 approval H4 status doesnt get "illegal" it just gets adjusted.
(Well...... nobody can have two statuses at the same time anyway).
Better check with your lawyer. Becuase when you apply for 485 and get approved your wife's H4 status becomes illegal. So don't know exactly about H1 or H4 on advanced parole. Lawyer is the best person for your case.
Put your wifes status as of the 485 filing date. Means if you are filing in July/August this will be H4.
You can travel in H4. Also no problem in changing status to H1 after october 1st. (She have an H1 approval doesnt mean she is NOW in H1 status. Her change of status is approved from Oct 1st). Please remember that if she doesnt start working in H1 on October 1st, technically, she will Neither be in H1 / H4 status on October 1st. Means she might fall under "adjustee" status.
Assuming that your wife starts in H1 status from Oct 1st, there is no problem in travelling in H1. (she might need to get an H1 visa stamp though).
The other option is she can fall under adjustee status and travel in AP, work in EAD.
Also after 485 approval H4 status doesnt get "illegal" it just gets adjusted.
(Well...... nobody can have two statuses at the same time anyway).
Better check with your lawyer. Becuase when you apply for 485 and get approved your wife's H4 status becomes illegal. So don't know exactly about H1 or H4 on advanced parole. Lawyer is the best person for your case.
hot chris andersen tattoos. chris andersen tattoos; chris andersen tattoos
gc_chahiye
11-09 01:10 AM
According to the following document from USCIS they issued receipts for approx 150K applications for AOS in sept. So my estimate of the total back log is
June filers 75k
July - 25k
August 200k
Sept 150k
Oct 50K
Total = 500k
http://www.uscis.gov/files/article/APPLICATIONS%20FOR%20IMMIGRATION%20BENEFITS_Septem ber07.pdf
why more filers in Sept than June? I thought most PDs were better in June than in Sept...
June filers 75k
July - 25k
August 200k
Sept 150k
Oct 50K
Total = 500k
http://www.uscis.gov/files/article/APPLICATIONS%20FOR%20IMMIGRATION%20BENEFITS_Septem ber07.pdf
why more filers in Sept than June? I thought most PDs were better in June than in Sept...
more...
house Birdman Chris Anderson
bobzibub
09-19 05:55 PM
Excellent Strategy
For the lay person to understand the economic consequences of skilled immigration, one can ask what would happen if they took a million highly skilled American workers out of the economy. That would clearly be bad.
How would the removal of a million skilled non-Americans be different? The economy as a whole would take a major hit in both cases.
Cheers,
-b
For the lay person to understand the economic consequences of skilled immigration, one can ask what would happen if they took a million highly skilled American workers out of the economy. That would clearly be bad.
How would the removal of a million skilled non-Americans be different? The economy as a whole would take a major hit in both cases.
Cheers,
-b
tattoo chris andersen tattoos. California, Chris Andersen
gaz
08-13 07:41 AM
his predictions were so accurate ... black 'copters landed and took him away... :p
more...
pictures chris andersen tattoos. Re: R4zoR works Chris Andersen
jasmin45
02-26 10:53 AM
Hi one question,,,if I go home to my country to study using H4 while my GC is pending,then suddenly the GC was sent to my sister here in US,can my sister just mail my GC to me in my country so that if i go back here in the US,i can present my GC to the US immigration???uh!im confussed!thanks!
First of all you have an "If" in your question. So I belive this is for future plan.
Now, when you say "suddenly GC was sent to your sister here in US" I am comfused as to whether your sister has already got the GC in mail and you are outside US?
I would request you to provide some more information on your status and info such as Whether you have had/will have approved "AP" etc before you left/plan to leave this country for studies.
First of all you have an "If" in your question. So I belive this is for future plan.
Now, when you say "suddenly GC was sent to your sister here in US" I am comfused as to whether your sister has already got the GC in mail and you are outside US?
I would request you to provide some more information on your status and info such as Whether you have had/will have approved "AP" etc before you left/plan to leave this country for studies.
dresses was social chris andersen of a
JDM
08-07 08:50 PM
/\/\/\/\/\/\/
more...
makeup Chris Andersen Cyberface
marblerock
06-11 12:32 PM
Mr. Sanju,
We are all aware of what going on at the Senate floor and also about the ammendments that put forth on the floor. So my question is clear anc simple what ammendment is supported by CORE IV and what are we looking for.
Because the passing of the current version of the bill will effect all the old cases which many people are in and I wont allow that to happen. I will try my best to avoid this situation to happen. Even though i have a MAster in engineering I will not support SKIL progran that will void the previously pending cases. Good try core IV yto make member to work towards the betterment of few people You know what such people are called" SELFFISH". Guys beware on whaT ACTIONS YOU ARE DOING SO THAT YOU WONT REPENT.
Please feel free to influence any bill any way you please. Seems like you are in cotrol of your destiny. When you point that SELFISH finger at the IV core, also look at the three fingers pointing back at you.
The IV position on the pertinent amendments already discussed on the floor is on the the front page of the website.
If your are privy to the amendments being negotiated behind the scenes, please be kind and share the information with us. None of us has any information on these and as such cannot take a position.
In my opinion you are asking for it. If everyone was not fatigued from last week, your allegedly disappearing thread would be flaming out pretty fast.
We are all aware of what going on at the Senate floor and also about the ammendments that put forth on the floor. So my question is clear anc simple what ammendment is supported by CORE IV and what are we looking for.
Because the passing of the current version of the bill will effect all the old cases which many people are in and I wont allow that to happen. I will try my best to avoid this situation to happen. Even though i have a MAster in engineering I will not support SKIL progran that will void the previously pending cases. Good try core IV yto make member to work towards the betterment of few people You know what such people are called" SELFFISH". Guys beware on whaT ACTIONS YOU ARE DOING SO THAT YOU WONT REPENT.
Please feel free to influence any bill any way you please. Seems like you are in cotrol of your destiny. When you point that SELFISH finger at the IV core, also look at the three fingers pointing back at you.
The IV position on the pertinent amendments already discussed on the floor is on the the front page of the website.
If your are privy to the amendments being negotiated behind the scenes, please be kind and share the information with us. None of us has any information on these and as such cannot take a position.
In my opinion you are asking for it. If everyone was not fatigued from last week, your allegedly disappearing thread would be flaming out pretty fast.
girlfriend chris andersen tattoos. Chris Andersen #11 of the; Chris Andersen #11 of the
gg_ny
08-21 03:23 PM
You are saying ur PD was Sec 2005? Mine is Dec 2005. Should I also expect it sometime soon :)?
We all can expect and keep expecting ;-) My PD is Nov 2004 (EB2 NIW), RD for 485 is Aug 2005. Who knows, you could be luckier and FBI likes your name... They seemed to be not liking mine though.
We all can expect and keep expecting ;-) My PD is Nov 2004 (EB2 NIW), RD for 485 is Aug 2005. Who knows, you could be luckier and FBI likes your name... They seemed to be not liking mine though.
hairstyles chris andersen tattoos. Chris Andersen A close up of
maddipati1
12-03 03:24 PM
there are lot of threads abt this topic. search it.
read form I-131 instructions, where it clearly says, AP appl. is considered abandoned if you leave US before its approval. this is for sure.
My wife is not H4, she is working on EAD and we applied her I-485 last July. She has to travel to India for an emegency. We applied for AP last month, have the receipt but it is not approved. Is it okay if she travels to India without AP approval? I will be here and I can take her approved AP when I go there after two months.
I heard that if she travels without AP, her I-485 is considered abonded. Is this true? Can we apply for her H4 (as I am still on H1). Any advice on how to get her back?
Thanks!
read form I-131 instructions, where it clearly says, AP appl. is considered abandoned if you leave US before its approval. this is for sure.
My wife is not H4, she is working on EAD and we applied her I-485 last July. She has to travel to India for an emegency. We applied for AP last month, have the receipt but it is not approved. Is it okay if she travels to India without AP approval? I will be here and I can take her approved AP when I go there after two months.
I heard that if she travels without AP, her I-485 is considered abonded. Is this true? Can we apply for her H4 (as I am still on H1). Any advice on how to get her back?
Thanks!
annsheila79
04-21 10:08 PM
enjoy food.. best place to enjoy all sorts of food in US
jediknight
09-16 02:05 PM
It's time to tell CNN not to give a platform for racists.
Drop Dobbs: Halt the Hate (http://www.dropdobbs.com/)
Please sign the petition
Take Action (http://www.dropdobbs.com/take-action/)
"Drop Dobbs": CNN Pressured To Give Up Controversial Host (VIDEO) (http://www.huffingtonpost.com/2009/09/16/drop-dobbs-cnn-pressured_n_288506.html)
Please also post this to other web forums, facebook, twitter and send emails to your friends and colleagues asking them to sign the petition.
- JK
Drop Dobbs: Halt the Hate (http://www.dropdobbs.com/)
Please sign the petition
Take Action (http://www.dropdobbs.com/take-action/)
"Drop Dobbs": CNN Pressured To Give Up Controversial Host (VIDEO) (http://www.huffingtonpost.com/2009/09/16/drop-dobbs-cnn-pressured_n_288506.html)
Please also post this to other web forums, facebook, twitter and send emails to your friends and colleagues asking them to sign the petition.
- JK
No comments:
Post a Comment